TERMAL TREATMENT IMPACT ON STRUCTURE AND COMPOSITION OF POROUS ALUMINA FILMS FORMED AT DIFFERENT VALUES OF FORMING VOLTAGE
Abstract
A fabrication of porous alumina films by electrochemical anodization of aluminium foils and aluminium films deposited on silicon wafers is presented. Anodization process was held in the 2 % sulphuric acid aqueous solution at different forming voltages. It was shown that thermal treatment at 450 °С and 950 °С leads to increase of anodic alumina film porosity and decrease of volume expansion factor. It was also defined that embedding of electrolyte components in anodic alumina during anodization in sulphuric acid solutions intensifies with the increase of forming voltage value.
About the Authors
D. A. Sasinovich
Белорусский государственный университет информатики и радиоэлектроники
Belarus
Belarus
V. B. Visotskiy
Белорусский государственный университет информатики и радиоэлектроники
Belarus
Belarus
S. K. Lazarouk
Белорусский государственный университет информатики и радиоэлектроники
Belarus
Belarus
References
1. Masuda H., Ohya M., Asoh H. et al. // Jpn. J. Appl. Phys. 1999. Vol. 38. No 12A. P. L1403-L1405.
2. Лазарук С.К., Лешок А.А., Лабунов В.А. и др. // Физика и техника полупроводников. 2005. Т. 39. Вып. 1. С. 149-152.
3. Lazarouk S., Muravski A., Sasinovich D. et al. // Jpn. J. Appl. Phys. 2007. Vol. 46. № 10A. P. 6889-6892.
4. Lazarouk S.K., Sasinovich D.A., Borisenko V.E. et al. // J. Appl. Phys. 2010. Vol. 107. P. 033527-1-4.
Review
For citations:
Sasinovich D.A., Visotskiy V.B., Lazarouk S.K. TERMAL TREATMENT IMPACT ON STRUCTURE AND COMPOSITION OF POROUS ALUMINA FILMS FORMED AT DIFFERENT VALUES OF FORMING VOLTAGE. Doklady BGUIR. 2014;(7):5-8. (In Russ.)
Views: 1498
Email this article 