Selection Algorithms of the Optimal Reinforcement for Strength and Crack Resistance of Reinforced Concrete Elements and Their Verification

One of the main stages in the design of reinforced concrete structures is to determine the crosssectional area of the reinforcement according to the requirements of strength, stiffness and crack resistance, the search for the number of rods based on the nomenclature of reinforcement, its placement in the cross section with the fulfillment of the conditions of durability, and fire resistance. The paper summarizes the experience of developing algorithms for solving the problem of selecting the optimal reinforcement of reinforced concrete elements and proposes an algorithm for optimizing reinforcement using nonlinear models of reinforced concrete elements. The proposed algorithm is implemented as a module of the software package for engineering construction calculations Beta 5.0. The article shows the results of verification of the proposed algorithms based on the results of trial operation of the module for selecting the optimal reinforcement within the activities of the Testing and Research Center of the Polotsk State University.

1. Krakowski M.B. [The program “OM SNiP Reinforced concrete” for calculating reinforced concrete structures on a computer]. Beton i zhelezobeton = Concrete and reinforced concrete. 2001;2:9-12. (In Russ.)

2. Tikhiy M., Rakosnik J., per. from Czech Sergeenko B.M. [Calculation of reinforced concrete frame structures in the plastic stage. Redistribution of efforts]. Moscov: Stroyizdat; 1976. (In Russ.)

3. Malyarenko A.A. [Letter to the editor regarding the article by M.B. Krakovsky “The program of OM SNiP Reinforced concrete for calculating reinforced concrete structures on a computer”]. Beton i zhelezobeton = Concrete and reinforced concrete. 2001;5. (In Russ.)

4. Glukhov D.O. [Solving the problem of selecting the optimal discrete longitudinal reinforcement of a reinforced concrete element according to the strength criterion] Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitelstvo. Prikladnyye nauki = Bulletin of Polotsk State University. Series F. Construction. Applied Sciences. 2007;6:36-41. (In Russ.)

5. Sadeghian, Vahid, Vecchio, Frank. The modified compression field theory: then and now. Aci Structural Journal. 2018;SP-328:3.1-3.20.

6. Evan C. Bentz, Frank J. Vecchio, Michael P. Collins. Simplified Modified Compression Field Theory of Calculating Shear Strength of Reinforced Concrete Elements. ACI Structural Journal. 2006;103:614-624.

7. Wissam N., Dhahir M.K., Naser F.H. A compression field based model to assess the shear strength of concrete slender beams without web reinforcement. Case Studies in Construction Materials. 2018;9.

8. Lazovsky D.N., Badalova E.N., ed. call.: Zverev V.F., Koleda S.M., Delendik S.N. [The introduction of European standards in standard series of reinforced concrete floors]. Sovremennyye problemy vnedreniya evropeyskikh standartov v oblasti stroitelstva: sbornik Mezhdunarodnykh nauchno-tekhnicheskikh statey (materialy nauchno-metodicheskoy konferentsii) 27-28 maya 2014 g. = Modern problems of implementing European standards in the field of construction: a collection of International scientific and technical articles (materials of scientific conference), May 27-28, 2014, Minsk. Minsk: BNTU; 2015: 85-91. (In Russ.)

9. Lazovsky A.D., Glukhov D.O., Glukhova T.M. [Algorithm for calculating the bending resistance of hollow-core slabs without formwork as part of platform joints of buildings]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya F. Stroitelstvo. Prikladnyye nauki = Bulletin of Polotsk State University. Series F. Construction. Applied Sciences. 2017:82-89. (In Russ.)