Modeling stress-strain state of the section of human dental apparatus with the account of contact interaction between the teeth and their partial absence
https://doi.org/10.35596/1729-7648-2021-19-5-21-28
Abstract
Complex interaction of incisors of the multi-element system “jaw – tooth – periodontium – enamel – dentinˮ is considered in the present work. The model was created on the basis of tomographic images taking into account previous studies of the human dental apparatus for a simplified model of three molars. The aim of the work is to determine the stress-strain states of the “jaw – periodontium – tooth – dentinˮ system for a different number of incisors and their location using three-dimensional computer finite-element modeling. The results of the study allow obtaining a more complete and accurate assessment of the state of the human dentofacial apparatus as a whole and each of its elements separately in order to improve the technologies and methods of prosthetics.
About the Authors
S. S. Sherbakov
State Committee on Science and Technology;
Belarusian State University
Belarus
Belarus
Sherbakov Sergei S., D.Sc., Professor, Vice Chairman of the State Committee on Science and Technology of the Republic of Belarus, Professor at the Department of Theoretical and Applied Mechanics of Belarusian State University
220030, Minsk, Nezavisimosti ave., 4
I. V. Koval
Belarusian State University
Belarus
Belarus
Koval Igor V., Postgraduate student at the Department of Theoretical and Applied Mechanics
Minsk
G. V. Gribovskii
Belarusian State University
Belarus
Belarus
Gribovskii Gleb V., Postgraduate student at the Department of Theoretical and Applied Mechanics
Minsk
M. M. Polestchuk
Belarusian State University
Belarus
Belarus
Polestchuk Mihail M., Postgraduate student at the Department of Theoretical and Applied Mechanics
Minsk
D. A. Padhaiskaya
Belarusian State University
Belarus
Belarus
Padhaiskaya Daria A., Postgraduate student at the Department of Theoretical and Applied Mechanics
Minsk
References
1. Sherbakov S.S., Koval I.V. [Computer modeling of the stress-strain state and volume damage of the human jaw]. Theoretical and applied mechanics. 2018;33:187-189. (in Russ.)
2. Sherbakov S.S., Koval I.V. [Computer modeling of three-dimensional stress-strain state and volume damage of the human dental apparatus]. Theoretical and applied mechanics. 2017;32:185-190. (in Russ.)
3. Benazzi S., Kullmer О., Ian R. Grosse and Gerhard W. Weber. Using occlusal wear information and finite element analysis to investigate stress distributions in human molars. Journal of Anatomy. 2012;123:657-65.
4. Benazzi S., Kullmer О., Ian R. Grosse and Gerhard W. Weber. Brief Communication: Comparing Loading Scenarios in Lower First Molar Supporting Bone Structure Using 3D Finite Element Analysis. American Journal of Physical Anthropology. 2012;147:128-134.
5. Kullmer О., Ian R. Grosse. Wear and Abrasion Resistance Selection Maps of Biological Materials. Journal of Anatomy. DOI 2009/.21607151:98–106(2009).
6. Dudar O.I., Melconyan E.A., Markov B.P., Svirin B.V., Shabrykina N.S. Stresses in a Tooth Restored by a Veneer. Russian Journal of Biomechanics. 2000;4(1).
7. Ivanitsky M. F. [Human Anatomy]. Moscow; 1966. (in Russ.)
8. Berezovsky V.A., Kolotilov N.N. [Biophysical characteristics of human tissues.]. Kiev; 1990:154-157.(in Russ.)
9. Sherbakov S.S., Sosnovsky L.A. [Mechanics of tribo-fatigue systems]. Minsk: BSU; 2011:54-61. (in Russ.)
10. Novak N.V., Baytus N.A. [The analysis of physical-mechanical characteristics of hard dental tissues and filling materials]. Vestnik VGMU. 2016;15(1):19-26. (in Russ.)
Review
For citations:
Sherbakov S.S., Koval I.V., Gribovskii G.V., Polestchuk M.M., Padhaiskaya D.A. Modeling stress-strain state of the section of human dental apparatus with the account of contact interaction between the teeth and their partial absence. Doklady BGUIR. 2021;19(5):21-28. (In Russ.) https://doi.org/10.35596/1729-7648-2021-19-5-21-28
Views: 1511
Email this article 